Product Details:
Minimum Order Quantity | 50 Piece |
Pressure | Unbalance 5 Bar And Balance Up to 35 Bar |
Temperature | Negative 60 Degree Celsius to Positive180 Degree Celsius |
To Be Used For | Petrochemicals, High Hydrocarbon, Dirty Water & Slurry, General Chemicals, Petroleum Refinery |
Shaft Diameter | 10 mm to 100 mm |
Conical Single Spring Seal is designed dependent on shaft direction of rotation. The Clockwise rotating shaft required Right-hand spring & the Anti Clockwise rotating required Left-hand spring. The rotating shaft transmits the drive to conical spring. The seal is easy to fit & pushed with shaft step or drive ring supports. These seals are comfortable to use in wide range of application bellow as.
Material Of Construction :
Additional Information:
Product Details:
Minimum Order Quantity | 6 Piece |
Usage/Application | Water, Milid chemicals |
Material | Stainless Steel |
Size | 12 mm TO 75 mm |
Brand | BI Seals |
Suitable For | Pumps |
Model No. | B-NR43 |
Robin Type Seal amongst the most commonly used. The bellows is not subjected to any torsional stress and its ingenious design incorporates several functions, as seal face carrier,secondary sealing element and drive collar. The seal face is driven through the spring and “L“-rings. There are no bonded joints and all the face materials are interchange able without having to modify any dimensions. Highly recommended for duties with media containing solids eg. in waste water and sewage applications
Seal faces and seats(see table for combinations): Silicon carbide SiC (Q1) Carbon graphite, antimony-impregnated (A) Tungsten carbide (U3) Special cast chromium-molybdenum steel (S) Aluminium oxide (V) Carbon graphite, resin-impregnated (B)Bellows: FPM (V), EPDM (E), NBR (P)Springs, “L“-rings:
Product Details:
Minimum Order Quantity | 6 Piece |
To Be Used For | Operating Limits |
Shaft Diameter | 14 mm to 100 mm |
Pressure | Unbalance 5 Bar And Balance Up to 35 Bar |
Temperature | Negative 50 Degree Celsius to Positive 220 Degree Celsius |
Sealing faces | Carbon, Ceramic (99.5 %), Silicon Carbide, Tungsten Carbide, Chrome Cast Steel and which are suitable for fluid |
Elastomer | Viton, EPDM, Silicon, Aflas, PTFE, GFT & Grafoil, Karlez, FEP, TTV |
Hardware | SS 316, Hastelloy C, Monel, Alloy 20 |
Additional Information:
Our company is known for presenting a wide assortment of Tapper Spring Seal for pumps to the customers. These Tapper Spring Seal for pumps are rust proof and accurate in dimension. Also, the demand of these Tapper Spring Seal for pumps is increasing day by day for their high tensile strength and long service life.
Combined Materials:
Stationary Ring (Ceramic/SiC/TC) Rotary Ring (Carbon/SIC/TC) Secondary Seal (NBR/EPDM/Viton) spring and metal part (Steel) T9, T4, T6 and C13 is also optional
Working Conditions:
Pumps: Water pumps, sewage pumps, and chemical pumps, etc.
Temperature: -20oC~180oC
Pressure: ≤1Mpa
Speed: ≤ 10m/Sec
Additional Information:
Single Spring Seal has self aligning feature which compensate abnormal shaft end play and run out, which leads to improved service life. Secondary seal protect shaft and sleeve from fretting.Drive to the seal faces is given through notches - provided on retainer. Seal can be repaired in field with minimum spares minimising the down time cost.